Stereo Bluetooth™ Headset HBH-DS970 support

Stereo Bluetooth™ Headset HBH-DS970 support
Sony Ericsson Stereo Bluetooth™ Headset HBH-DS970
Accessory instructions: HBH-DS970
Make sure the headset is fully charged and within 1 m (3 ft) of the phone.
Make sure the headset is turned off and in single point mode.
Press and hold the On/Off button for at least five seconds, until you hear a long beep after the first signal. The headset is now in pairing mode.
If your phone supports auto pairing, press "Yes" when the question Add device? appears in your phone. If it doesn't, continue with the next step.
Prepare your phone in accordance with the phone instructions for adding a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.

Phone instructions: C702
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: C902
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: C905
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: G502
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K320i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K510i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K530i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K550im
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K550i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K608i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K600i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K610i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K610im
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K660i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K770i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K800i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K810i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K850i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: M600i
Go to Menu > Tools > Control panel > Connections.
Select Bluetooth > My devices.
Select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: P1i
From standby, go to Main menu > Control panel > Connections.
Select Bluetooth > Bluetooth on.
Go to the Mobile phone tab and select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: P990i
Go to Menu > Tools > Control panel > Connections.
Select Bluetooth > My devices.
Select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: S500i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: T650i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: V630i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

hone instructions: V640i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W380i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W580i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W595
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W610i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W660i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W710i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W760i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W850i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W880i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W890i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W902
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W950i
Go to Menu > Tools > Control panel > Connections.
Select Bluetooth > My devices.
Select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: X1
From standby, tap Start > Settings > Connections (tab).
Tap Bluetooth > Mode (tab).
Tick the box for Turn on Bluetooth and Make this device visible to other devices.
Select the Devices (tab), and tap "Add new device."
Your phone will now start to search for other Bluetooth devices. Make sure the headset is in pairing mode.
When the headset becomes visible in the list, highlight it and tap Next.
Enter the PASSKEY (0000 by default) and tap Next.
The headset is now added to the list of paired devices and is ready to use.

Phone instructions: Z610i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: Z710i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.