Bluetooth™ Headset HBH-610a support

Accessory instructions: HBH-610a
Sony Ericsson Bluetooth™ Headset HBH-610a
Make sure the headset is fully charged, switched on and within 1 m (3 ft) of the phone.

The first time you turn your headset on, it immediately goes into pairing mode. The light flashes red and green. If so, proceed to the phone instructions below.

To manually prepare the headset, press the Volume buttons, (+) and (-), at the same time for approximately 5 seconds until you hear a long high-frequency beep and the light flashes red and green. The headset is now in "Pairing mode".

Phone instructions: D750i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K510i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K530i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K320i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K550im
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K550i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K608i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K600i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K610i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K610im
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K700i
Go to Menu > Connectivity > Bluetooth.
Select My devices > New device.
The phone starts searching for handsfree devices. Make sure the Bluetooth accessory is in pairing mode.
When the headset becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K750i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K770i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K800i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K810i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: K850i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: M600i
Go to Menu > Tools > Control panel > Connections.
Select Bluetooth > My devices.
Select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: P1i
From standby, go to Main menu > Control panel > Connections.
Select Bluetooth > Bluetooth on.
Go to the Mobile phone tab and select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: P900
In the Application view, tap on Control panel, Connections tab, Bluetooth.
Tap the Settings tab and set Bluetooth to "On".
Select the Devices tab and press "Add".
The phone starts searching for Bluetooth devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Available devices menu, tap it.
Enter the Passcode (0000 by default) and press "Done". On the screen, Bonding completed appears.
Tap "Done" and the accessory is added to the list of Bluetooth devices, ready to use.

Phone instructions: P910i
In the Application view, tap on Control panel, Connections tab, Bluetooth.
Tap the Settings tab and set Bluetooth to "On".
Select the Devices tab and press "Add".
The phone starts searching for Bluetooth devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Available devices menu, tap it.
Enter the Passcode (0000 by default) and press "Done". On the screen, Bonding completed appears.
Tap "Done" and the accessory is added to the list of Bluetooth devices, ready to use.

Phone instructions: P990i
Go to Menu > Tools > Control panel > Connections.
Select Bluetooth > My devices.
Select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: S500i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: T650i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: V600i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: V630i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W300i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W550i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W580i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W610i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W660i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W700i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W710i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W800i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W810i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W850i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W880i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W900i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: W950i
Go to Menu > Tools > Control panel > Connections.
Select Bluetooth > My devices.
Select New device.
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: Z310i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: Z530i
Go to Menu > Settings > Connectivity.
Select Bluetooth > My devices.
Select New device, "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: Z610i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.

Phone instructions: Z710i
Go to Menu > Settings and select the Connectivity tab.
Select Bluetooth > My devices.
When New device appears, press "Add".
The phone starts searching for devices. Make sure the Bluetooth accessory is in pairing mode.
When the accessory becomes visible in the Devices found menu, highlight it and press "Select".
Enter the Passcode (0000 by default) and press "OK".
The accessory is now added to the list of paired devices and is ready to use.